Single tube heating element - Ø 16 - 500 W - 230 V 1P - L 630 mm - Cable output
Product N° : 60307.00
Single tube electric heating element for heating circulating oil in a low flow heater DN20 low flow heater. Power consumption: 500 W / 230 V 1P. Output via a cable with a length of approx. 350 mm. The heating element is equipped with a sleeve that can receive a Ø 1 mm thermocouple (not supplied).
- Heater power (W) :
- 500
- Power tolerance :
- +5/-10%
- Supply voltage of the heating element :
- 230 V 1P
- Specific load (W/cm2)
- 2.5
- Heater diameter (mm) :
- 16
- Heater material :
- 321 Stainless steel
- Total length of the heating element L (mm) :
- 630
- Plunge length A (mm) :
- 480
- Non-heating length Nh (mm) :
- 65
- Fixing cap diameter :
- M20 x 150
- Fixing cap material :
- 316L Stainless steel
- Connection of the cap to the heating element :
- Sealed TIG welding
- Position of the fixing cap (D) mm :
- 135
- Sealing :
- WP+ - Resin (Reinforced sealing, 160 °C max. at terminals)
- Protection of the caps :
- Without - Cable outlet, length 350 mm
- Safety device on the heating element :
- FoureauTcDia1