Single tube heating element - Ø 16 - 500 W - 230 V 1P - L 745 mm with polyamide junction box
Product N° : 60301.01
Single tube electric heating element for heating circulating air or nitrogen in a DN20 low flow heater. Power consumption: 500 W / 230 V 1P. Protection of the connectors by polyamide junction box. The heating element is equipped with a safety K thermocouple.
- Heater power (W) :
- 500
- Power tolerance :
- +5/-10%
- Supply voltage of the heating element :
- 230 V 1P
- Specific load (W/cm2)
- 3
- Heater diameter (mm) :
- 16
- Heater material :
- 321 Stainless steel
- Total length of the heating element L (mm) :
- 745
- Plunge length A (mm) :
- 410
- Non-heating length Nh (mm) :
- 65
- Fixing cap diameter :
- M20 x 150
- Fixing cap material :
- 316L Stainless steel
- Connection of the cap to the heating element :
- Sealed TIG welding
- Offset of box B (mm) :
- 230
- Sealing :
- WP+ - Resin (Reinforced sealing, 160 °C max. at terminals)
- Protection of the caps :
- H1 Terminal box - IP55 - Polyamide
- Cable gland :
- 2 ISO 32 and 16 polyamide cable gland
- Safety device on the heating element :
- K Thermocouple