PID controller 48x96 - Pt100 sensor input, range -50/+350°C - Relay output - 1 Alarm output
Product N° : 30881.01
Self-adapting, single-loop PID temperature controller with 3 outputs. 3-wire Pt100 sensor input, preset temperature range -50/+350 °C. Control output 1: 2A/240 VAC changeover relay, output n°2: relay for alarm control. IP66 front panel, size 48 x 96 mm, equipped with a 4-key keypad for setting the instrument and a double 4-digit display for reading the setpoint and the measurement. Power supply 100 to 240 V 1P. The device can be mounted on the front of a cabinet or on a Din rail. Possibility to program a temperature ramp up to the setpoint. Output 3 and options A and B are not equipped.
- Front dimensions (mm) :
- 48 x 96
- Input signal :
- Pt100 Sensor - 3 Wires
- Preset temperature range (°C) :
- -50 / +350
- Number of control loops :
- 1
- Regulation mode :
- PID
- Control output on Slot 1 :
- Switch
- Relay on control output :
- 1 Changeover contact 2A max / 240 V AC
- Adjustment mode :
- Self-adapting or manual
- Exit on Slot n° 2 :
- Alarm
- Exit on Slot n° 3 :
- Not assembled
- Alarm relay :
- 1 Changeover contact 2A max / 240 V AC
- Retransmission of measurement or setpoint on Slot A :
- Not assembled
- Remote setpoint with local/remote switch on Slot B :
- Not assembled
- Regulator supply voltage (V) :
- 100 / 240
- Number of setpoints :
- 1
- 1 Configurable setpoint ramp :
- Oui
- Accuracy :
- +/-0.1% of input scale +/-1 digit
- Operator interface :
- 4-button keypad
- Display of values :
- Two 4-digit displays for setpoint and measurement
- Display colour :
- Measurement: Red - Setpoint: Green
- Cut-out for mounting (mm) :
- 45 x 92 (0/+0,5)
- Regulator Depth D (mm) :
- 100
- Front panel protection :
- IP66
- Controller assembly :
- Front or Din rail mounted
- Operating temperature :
- 0 to 55 °C (storage from -20 to 80 °C)
- Hygrometry :
- 20% to 95% HR without condensation
- Weight (kg) :
- 0.25
-
User manual
Related product
