Circulation water heater for heat pump - 3000 W - 400 V 3P
Product N° : 10601.01
Circulating liquid heater for recycling water heating (in a closed loop), with a maximum temperature of 75°C and a maximum operating pressure of 9.5 bar.g. It is designed for supplementary heat for heat pumps during winter when temperatures are too low.
Consisting of a 304 stainless steel body insulated with elastomer foam, with 1''1/4 male cylindrical threaded inlet/outlet connections. With a unit power of 3000 W / 400 V 3P, the heater is equipped with an adjustable thermostat for regulation between 32°C and 75°C, and a fixed safety thermostat set at 98°C. It has the advantage of being "plug and play."
- Total heater power (W) :
- 3000
- Power tolerance :
- +5/-10%
- Heater supply voltage :
- 400 V 3P
- State of the fluid to be heated :
- Liquid
- Type of fluid to be heated :
- Water
- Minimum operating temperature (°C) :
- 5
- Maximum operating temperature (°C) :
- 75
- Maximum operating pressure (bar.g) :
- 9.5
- Min/max operating flow (l/h) :
- 500 / 2500
- Input/output tapping :
- 1''1/4 male cylindrical gas thread
- Flow heater length L1 (mm)
- 554
- Body material :
- 304 Stainless steel
- Material of the heating pins :
- 825 Incoloy®
- Insulation material :
- Elastomeric foam
- Control device on the immersion heater
- Plage32a75Auto
- Safety device on the immersion heater :
- Fixe98Manuel
- Connection box :
- IP45 plastic junction box
- Cable gland :
- ISO 20
- Min. permissible temperature / TS min. (°C) :
- 2
- Max. permissible temperature / TS max. (°C) :
- 100
- Max. permissible pressure / PS max. (bar.g) :
- 10
- Ambient temperature (°C) :
- +2 °C to +35 °C
- PED Fluid Group :
- 2 (non dangerous)
- Category of the PED 2014/68/EU :
- Equipment covered by article 4§3
- Heater weight (kg) :
- 3.65
- Construction code :
- Standard Vulcanic
-
User manual
