Low flow air or nitrogen heater - 1000 W - 230 V 1P - Without case or control sensor
Product N° : 10706.02
Gas circulation heater for heating air or nitrogen to max. 350 °C at max. operating pressure of 9.5 bar g. Minimum operating flow rate 40 kg/h. It consists of 1 DN25 304L stainless steel body with 3/4'' gas tapped inlet/outlet connections and a Ø 16 monotubular heating element with a unitary power of 1000 W / 230 V 1P. Electrical connection directly by cables.
- Total heater power (W) :
- 1000
- Power tolerance :
- +5/-10%
- Heater supply voltage :
- 230 V 1P
- State of the fluid to be heated :
- Gas
- Type of fluid to be heated :
- Air or nitrogen
- Number of heating units :
- 1
- Specific load (W/cm2)
- 3
- Minimum operating temperature (°C) :
- 5
- Maximum operating temperature (°C) :
- 350
- Maximum operating pressure (bar.g) :
- 9.5
- Minimum flow at rated power :
- 40 kg/h
- Body diameter DN :
- 25
- LN pole of the heater (mm) :
- 1130
- Body material :
- 304L Stainless steel
- Internal body treatment :
- Sans
- External body treatment :
- Sans
- Input/output tapping :
- 3/4'' gas tap
- Immersion heater part number :
- 60302.00
- Diameter of the heating pins :
- 16
- Heating element material :
- 321 Stainless steel
- Fixing cap diameter :
- M20 x 150
- Fixing cap material :
- 316L Stainless steel
- Protection of the plugs :
- Without - Cable outlet, length 350 mm
- Safety device on the heating element :
- K Thermocouple
- Control device on the outlet nozzle :
- Sans
- Category of the PED 2014/68/EU :
- Equipment covered by article 4§3
- Min. permissible temperature / TS min. (°C) :
- 5
- Max. permissible temperature / TS max. (°C) :
- 450
- Max. permissible pressure / PS max. (bar.g) :
- 10
- Heater mounting position :
- Horizontal
- Construction code :
- Standard Vulcanic
- Heater weight (kg) :
- 2.7
-
User manual
-
Datasheet
Spare parts and accessories
