Screw plug immersion heater 1''1/2 Gas cyl. - 6000 W / 400 V 3P - 5W/cm2 - With thermowell and junction box

Product N° : 2115.09
Screw plug immersion heater 1''1/2 211501 Vulcanic View1
search
  • Screw plug immersion heater 1''1/2 211501 Vulcanic View1
  • Screw plug immersion heater 1''1/2 211501 Vulcanic View2
  • Screw plug immersion heater 1''1/2 211509 Vulcanic Draw

Screw plug immersion heater 6000 W / 400 V 3P recommended for circulating oil heating up to 100 °C. It consists of three 316L stainless steel shielded heating elements welded to a steel threaded fixing plug 1''1/2 Gaz cyl. The heating elements have a plunge length of 960 mm and are loaded at 5 W/cm2. The immersion heater is equipped with a plastic IP54 connector terminal box and a thermowell allowing the installation of a regulation or safety device. Maximum allowable pressure 15 bar.g. It is supplied with 1 fibre seal.

Can be made , Under 7 days

Plug thread standard :
Cylindrical gas BSPP
Screw plug diameter :
1''1/2
Immersion heater power (W) :
6000
Power tolerance :
+5/-10%
Supply voltage :
400 V 3P
Recommended fluid heating :
Circulating oil
Maximum allowable temperature / TS max (°C) :
110
Maximum operating temperature (°C) :
100
Maximum allowable pressure / max PS (bar) :
15
Specific load (W/cm2) :
5
Immersion length A (mm) :
960
Number of heating elements :
3
Shape of resistance :
Simple pins
Resistor diameter :
8
Heating elements material :
316L Stainless steel
Resistance treatment :
No treatment
Plug material :
Acier
Connection of the resistors to the plug :
Welded
Bounding of resistors :
M4 steel threaded terminals
Resistor coupling :
Star
Non-heating length Nh (mm) :
40
Connector offset B (mm) :
Without
Max. pin bundle diameter ØF (mm) :
42
Dimension on/flats of plug H (mm) :
60
Sealing of resistors :
WP+ - Resin (Reinforced sealing, 160 °C max. at terminals)
Control or safety device no. 1 :
Bare thermowell Ø 8 mm internal
Installation of control and safety devices :
In the fluid
Size T (mm) :
930
Connector protection box :
Junction box model Q1 - Plastic - IP54
Cable gland diameter :
1 x ISO 25 + 1 x ISO 20
Cable gland material :
Polyamide
Weight (kg) :
3.5
Accessories included:
1 Fibre seal
  • User manual