Screw plug immersion heater M45 x 200 with offset - 6000 W / 400 V 3P - 5W/cm2 - With thermostat -20/40°C with internal setting
Product N° : 3217.53
Screw plug immersion heater 6000 W / 400 V 3P recommended for frost protection. It is made up of 3 shielded heating elements in Incoloy® 825 brazed to a brass threaded fixing plug ISO M45 x 200. The heating elements have a plunge length of 960 mm and are loaded at 5 W/cm2. The immersion heater is equipped with a remote plastic IP54 connector terminal box and a control thermostat with automatic reset adjustable from -20 to 40 °C by internal knob. Maximum allowable pressure 15 bar.g. It is supplied with 1 fibre seal.
- Plug thread standard :
- Metric ISO
- Screw plug diameter :
- M45x200
- Immersion heater power (W) :
- 6000
- Power tolerance :
- +5/-10%
- Supply voltage :
- 400 V 3P
- Recommended fluid heating :
- Water freeze protection
- Maximum allowable temperature / TS max (°C) :
- 200
- Maximum operating temperature (°C) :
- 40
- Maximum allowable pressure / max PS (bar) :
- 15
- Specific load (W/cm2) :
- 5
- Immersion length A (mm) :
- 960
- Number of heating elements :
- 3
- Shape of resistance :
- Simple pins
- Resistor diameter :
- 8
- Heating elements material :
- 825 Incoloy®
- Resistance treatment :
- No treatment
- Plug material :
- Brass
- Connection of the resistors to the plug :
- Brazed
- Bounding of resistors :
- M4 steel threaded terminals
- Resistor coupling :
- Star
- Non-heating length Nh (mm) :
- 40
- Connector offset B (mm) :
- 60
- Max. pin bundle diameter ØF (mm) :
- 42
- Dimension on/flats of plug H (mm) :
- 60
- Sealing of resistors :
- WP+ - Resin (Reinforced sealing, 160 °C max. at terminals)
- Control or safety device no. 1 :
- Adjustable thermostat from -20 to 40 °C with automatic reset
- Installation of control and safety devices :
- In the fluid
- Casting of control and safety devices with power :
- No
- Size T (mm) :
- 910
- Connector protection box :
- Junction box model Q25 - Plastic - IP54
- Cable gland diameter :
- 1 x ISO 25 + 1 x ISO 20
- Cable gland material :
- Polyamide
- Weight (kg) :
- 3.5
- Accessories included:
- 1 Fibre seal
-
User manual
