Vulcatherm Hot/Cold - Oil 250 °C max - Heating power 30kW / 400V 3P - Cooling by water from the customer network
Product N° : 10803.30
Vulcatherm temperature control unit Hot/Cold for heating, cooling and regulating a closed oil loop (ISO32 mineral oil recommended) from 10°C to 250°C max intended for industrial process at high temperature and low pressure, reactor , press moulding... Heating power of 30 kW / 400 V tri + T. Cooling by oil/water exchanger supplied by the customer's industrial water network. Atmospheric expansion of the medium. Maximum admissible pressure of 10 bar.g in the circuit.
The Vulcatherm temperature control unit consists of:
- 1 Electrical heater with temperature sensors
- 2 Pumps
- 1 Oil/Water Exchanger
- 1 Atmospheric expansion tank
- 1 Electrical cabinet with integrated Central Management System
- Sensors for control and safety
in a painted frame equipped with castors
- Vulcatherm model :
- Hot/Cold
- Heat transfer medium :
- Oil
- Type of heat transfer medium expansion :
- Atmospheric
- Heating power (kW) :
- 30
- Tolerance on heating power :
- +5/-10%
- Supply voltage :
- 400 V 3P + E
- Maximum current absorbed at 400 V 3P (A) :
- 54
- Maximum temperature of the heat transfer medium (°C) :
- 250
- Cooling power :
- 60 kW for heat transfer fluid at 200°C and cooling water at 20°C
- Minimum temperature of the heat transfer medium (°C) :
- 10
- Cooling device :
- Oil/Water exchanger with cooling by industrial water from the customer's network
- Maximum pressure allowed in the current (bar.g) :
- 10
- Nominal flow of the heat transfer medium :
- 4,5 m3/h at delta P of 4.4 bar
- Expansion volume (l) :
- 15.1
- Medium inlet and outlet connections :
- Flange DN25
- Connections for cooling:
- 1/2'' female gas thread
- Système de gestion centralisé (automate)
- Integrated central management (controller)
- Body material :
- Painted frame equipped with castor
- Vulcatherm dimensions (mm) :
- L: 600 x H: 1600 x D:1000
-
User manual
