Vulcatherm Hot/Refrigerated - Oil 180 °C max - Heating power 20kW / 400V 3P - With water cooled refrigerating unit

Product N° : 10823.19
Temperature control units Vulcatherm Hot/Refrigerated Oil 10823 Vulcanic Vue1
search
  • Temperature control units Vulcatherm Hot/Refrigerated Oil 10823 Vulcanic Vue1
  • Temperature control units Vulcatherm Hot/Refrigerated Oil 10823 Vulcanic Draw
  • Opertaing curve of Vulcatherm Hot/Cold Vulcanic Draw

Vulcatherm temperature control unit Hot/Refrigerated for heating, cooling and regulating a closed oil loop (ISO32 mineral oil recommended) from -10°C to 180°C max intended for process requiring a wide temperature range, crystallizer , test benches, chemical reactor, etc. Heating power of 20 kW / 400 V tri + T. Cooling by integrated refrigerating unit and exchanger/condenser supplied by the customer's industrial water network. Atmospheric expansion of the medium. Maximum admissible pressure of 10 bar.g in the circuit.

Can be made , Under 70 days

The Vulcatherm thermoregulator consists of:

- 1 Electrical heater with temperature sensors

- 1 Pump

- 1 Atmospheric expansion tank

- 1 Evaporator exchanger

- 1 condenser water cooled

- 1 Refrigerating compressor

- 1 Electrical cabinet with integrated Central Management System

- Sensors for control and safety

in a painted frame equipped with castors

Vulcatherm model :
Hot/Refrigerated
Heat transfer medium :
Oil
Type of heat transfer medium expansion :
Atmospheric
Heating power (kW) :
20
Tolerance on heating power :
+5/-10%
Supply voltage :
400 V 3P + E
Maximum current absorbed at 400 V 3P (A) :
45
Maximum temperature of the heat transfer medium (°C) :
180
Cooling power :
30 kW for heat transfer fluid at 10°C and cooling water at 25°C
Minimum temperature of the heat transfer medium (°C) :
-10
Cooling device :
Refrigeration unit with water cooling (customer network)
Maximum pressure allowed in the current (bar.g) :
10
Nominal flow of the heat transfer medium :
3 m3/h at delta P of 2.9 bar
Expansion volume (l) :
15.6
Medium inlet and outlet connections :
Flange DN20
Connections for cooling:
3/4'' female gas thread
Système de gestion centralisé (automate)
Integrated central management (controller)
Body material :
Painted frame equipped with castor
Vulcatherm dimensions (mm) :
L: 950 x H: 1660 x D:900
  • User manual