Vulcatherm Hot/Cold - Water 90 °C max - Heating power 60kW / 400V 3P - Cooling by water from the customer network
Product N° : 10801.60
Vulcatherm temperaure control unit Hot/Cold for heating, cooling and regulating a closed water loop from 10°C to 90°C max intended for polymer extrusion and injection applications, vacuum processes, etc. Heating power 60 kW / 400 V 3P + E. Cooling by water/water exchanger supplied by the customer's industrial water network. Atmospheric expansion of the medium. max admissible pressure of 10 bar.g in the circuit.
The Vulcatherm temperature control unit consists of:
- 1 Electrical heater with temperature sensors
- 1 Pump
- 1 Water/Water Exchanger
- 1 Atmospheric expansion tank
- 1 Electrical cabinet with integrated Central Management System
- Sensors for control and safety
in a painted frame equipped with castors
- Vulcatherm model :
- Hot/Cold
- Heat transfer medium :
- Water
- Type of heat transfer medium expansion :
- Atmospheric
- Heating power (kW) :
- 60
- Tolerance on heating power :
- +5/-10%
- Supply voltage :
- 400 V 3P + E
- Maximum current absorbed at 400 V 3P (A) :
- 96
- Maximum temperature of the heat transfer medium (°C) :
- 90
- Cooling power :
- 180 kW for heat transfer fluid at 85°C and cooling water at 20°C
- Minimum temperature of the heat transfer medium (°C) :
- 10
- Cooling device :
- Water/Water exchanger with cooling by industrial water from the customer's network
- Maximum pressure allowed in the current (bar.g) :
- 10
- Nominal flow of the heat transfer medium :
- 9 m3/h at delta P of 3.2 bar
- Expansion volume (l) :
- 22.9
- Medium inlet and outlet connections :
- 1''1/2 male gas thread
- Connections for cooling:
- 3/4'' female gas thread
- Système de gestion centralisé (automate)
- Integrated central management (controller)
- Body material :
- Painted frame equipped with castor
- Vulcatherm dimensions (mm) :
- L: 600 x H: 1600 x D:1000
- Weight (kg) :
- 210
-
User manual
