Vulcatherm Hot/Air cooled - Water 90 °C max - Heating power 6kW / 400V 3P - Air cooling
Product N° : 10831.06
Vulcatherm temperature control unit Hot/Air-cooled thermoregulator for heating, cooling and regulating a closed water loop from 40°C to 90°C max intended for moulding, injection, heating jacket,, tracing, etc. Heating power 6 kW / 400 V 3P + E + N. Cooling by water/air exchanger with fan, ideal for installations without a cold water network. Atmospheric expansion of the medium. max admissible pressure of 10 bar.g in the circuit.
The Vulcatherm temperature control unit consists of:
- 1 Electrical heater with temperature sensors
- 1 Pump
- 1 Water/Air Exchanger with fan
- 1 Atmospheric expansion tank
- 1 Electrical cabinet with integrated Central Management System
- Sensors for control and safety
in a painted frame equipped with castors
- Vulcatherm model :
- Hot/Air cooled
- Heat transfer medium :
- Water
- Type of heat transfer medium expansion :
- Atmospheric
- Heating power (kW) :
- 6
- Tolerance on heating power :
- +5/-10%
- Supply voltage :
- 400 V 3P + E + N
- Maximum current absorbed at 400 V 3P (A) :
- 14
- Maximum temperature of the heat transfer medium (°C) :
- 90
- Cooling power :
- 8,5 kW for heat transfer fluid at 90°C and cooling air at 32°C
- Minimum temperature of the heat transfer medium (°C) :
- 40
- Cooling device :
- Water/Air exchanger with air cooling (fan)
- Maximum pressure allowed in the current (bar.g) :
- 10
- Nominal flow of the heat transfer medium :
- 0.9 m3/h at delta P of 3.3 bar
- Expansion volume (l) :
- 9.4
- Medium inlet and outlet connections :
- 3/4'' male gas thread
- Système de gestion centralisé (automate)
- Integrated central management (controller)
- Body material :
- Painted frame equipped with castor
- Vulcatherm dimensions (mm) :
- L: 500 x H: 1320 x D:950
- Additional information :
- Neutral connection imperative
-
User manual
