Vulcatherm Hot/Air cooled - Oil 180 °C max - Heating power 60kW / 400V 3P - Air cooling
Product N° : 10833.60
Vulcatherm temperature control unit Hot/Air-cooled for heating, cooling and regulating a closed oil loop (ISO32 mineral oil recommended) from 40°C to 180°C max intended for moulding, injection, heating jacket,, tracing, etc. Heating power 60 kW / 400 V tri + T + N. Cooling by oil/air exchanger with fan, ideal for installations without a cold water network. Atmospheric expansion of the heat transfer fluid. Pressure maximum admissible of 10 bar.g in the circuit.
The Vulcatherm thermoregulator consists of:
- 1 Instrumented electric heater
- 2 Pumps
- 1 Oil/air exchanger with fan
- 1 Atmospheric expansion tank
- 1 Electrical cabinet with integrated Central Management System
- Sensors for control and safety
in a painted frame equipped with castors
- Vulcatherm model :
- Hot/Air cooled
- Heat transfer medium :
- Oil
- Type of heat transfer medium expansion :
- Atmospheric
- Heating power (kW) :
- 60
- Tolerance on heating power :
- +5/-10%
- Supply voltage :
- 400 V 3P + E + N
- Maximum current absorbed at 400 V 3P (A) :
- 106
- Maximum temperature of the heat transfer medium (°C) :
- 180
- Cooling power :
- 100 kW for heat transfer fluid at 125°C and cooling air at 32°C
- Minimum temperature of the heat transfer medium (°C) :
- 40
- Cooling device :
- EchangeurHuile-Air
- Maximum pressure allowed in the current (bar.g) :
- 10
- Nominal flow of the heat transfer medium :
- 9 m3/h at delta P of 3.4 bar
- Expansion volume (l) :
- 40.1
- Medium inlet and outlet connections :
- Flange DN40
- Système de gestion centralisé (automate)
- Integrated central management (controller)
- Body material :
- Painted frame equipped with castor
- Vulcatherm dimensions (mm) :
- L: 1000 x H: 2050 x D:1600
-
User manual
