Screw plug immersion heater 2''1/2 gas cyl. - 6000 W / 230-400 V - 5W/cm2 - Without junction box

Product N° : 2077.53
Screw plug immersion heater M77 207711 Vulcanic View1
search
  • Screw plug immersion heater M77 207711 Vulcanic View1
  • Screw plug immersion heater M77 207711 Vulcanic View2
  • Screw plug immersion heater 2''1/2 207753 Vulcanic Draw

Screw plug immersion heater 6000 W recommended for heating recycled water or water-based liquids up to 100 °C. Delivered without coupling, the immersion heater can be loaded with 230 V 1P, 230 V 3P or 400 V 3P. It is made up of 3 316L stainless steel shielded heating elements brazed to a threaded 2''1/2 gaz cyl. fixing plug in protected steel. The heating elements have a plunge length of 460 mm and are loaded at 5 W/cm2. The immersion heater is equipped with a M77x 200, on the connector side, for the mounting of a junction box (supplied as an option, see accessories). Maximum allowable pressure 15 bar.g. It is supplied with 1 fibre seal.

Can be made , Under 21 days

Plug thread standard :
Cylindrical gas BSPP
Screw plug diameter :
2''1/2
Immersion heater power (W) :
6000
Power tolerance :
+5/-10%
Supply voltage :
231 V 1P, 230 V 3P or 400 V 3P
Recommended fluid heating :
Softened water and water-based liquids
Maximum allowable temperature / TS max (°C) :
110
Maximum operating temperature (°C) :
100
Maximum allowable pressure / max PS (bar) :
15
Specific load (W/cm2) :
5
Immersion length A (mm) :
460
Number of heating elements :
3
Shape of resistance :
Simple pins
Resistor diameter :
16
Heating elements material :
316L Stainless steel
Resistance treatment :
No treatment
Plug material :
Acier
Connection of the resistors to the plug :
Brazed
Bounding of resistors :
M6 steel threaded terminals
Resistor coupling :
Uncoupled
Non-heating length Nh (mm) :
50
Connector offset B (mm) :
Without
Max. pin bundle diameter ØF (mm) :
70
Dimension on/flats of plug H (mm) :
95
Sealing of resistors :
WP+ - Resin (Reinforced sealing, 160 °C max. at terminals)
Control or safety device no. 1 :
Without
Connector protection box :
Without
Junction box mounting interface :
Threaded interface M77 x 201
Weight (kg) :
3.2
Accessories included:
1 Fibre seal
  • User manual