Screw plug immersion heater 1''1/2 Gas cyl. - 3000 W / 400 V 3P - 9,4W/cm2 - With thermostat 30/75°C
Product N° : 2048.02
Screw plug immersion heater 3000 W / 400 V 3P recommended for heating water up to 75 °C. It is made up of 3 shielded heating elements in Incoloy® 825 brazed to a 304L stainless steel threaded fixing plug 1''1/2 Gas cyl. The heating elements have a plunge length of 250 mm and are loaded at 9,4 W/cm2. The immersion heater is equipped with an IP44 polyamide protection cover, an automatic reset control thermostat adjustable from 30 to 75°C and a manual reset temperature limiter preset to 98°C. Maximum allowable pressure 10 bar.g. It is supplied with 1 fibre seal.
- Plug thread standard :
- Cylindrical gas BSPP
- Screw plug diameter :
- 1''1/2
- Immersion heater power (W) :
- 3000
- Power tolerance :
- +5/-10%
- Supply voltage :
- 400 V 3P
- Recommended fluid heating :
- Water
- Maximum allowable temperature / TS max (°C) :
- 98
- Maximum operating temperature (°C) :
- 75
- Maximum allowable pressure / max PS (bar) :
- 10
- Specific load (W/cm2) :
- 9.4
- Immersion length A (mm) :
- 250
- Number of heating elements :
- 3
- Shape of resistance :
- Simple pins
- Resistor diameter :
- 8.5
- Heating elements material :
- 825 Incoloy®
- Resistance treatment :
- No treatment
- Plug material :
- 304 Stainless steel
- Connection of the resistors to the plug :
- Brazed
- Bounding of resistors :
- Stirrups
- Resistor coupling :
- Star
- Non-heating length Nh (mm) :
- 50
- Connector offset B (mm) :
- Without
- Max. pin bundle diameter ØF (mm) :
- 42
- Dimension on/flats of plug H (mm) :
- 60
- Sealing of resistors :
- WP+ - Resin (Reinforced sealing, 160 °C max. at terminals)
- Control or safety device no. 1 :
- Thermostat adjustable from 20 to 75 °C with automatic reset + Limiter set at 98 °C with manual reset
- Installation of control and safety devices :
- In the fluid
- Casting of control and safety devices with power :
- Yes
- Size T (mm) :
- 220
- Connector protection box :
- IP45 plastic junction box
- Cable gland diameter :
- ISO 20
- Cable gland material :
- Polyamide
- Weight (kg) :
- 1.4
- Accessories included:
- 1 Fibre seal
-
User manual
Spare parts and accessories
